Welcome to the official website of Hongtuo Instruments.
Differential scanning calorimeter DH-DSC-510C
Number:
Activity price:
¥
Market price:
¥
Category:
Details
Related Products
Introduction:
DSC is a differential scanning calorimeter with the highest precision in our company. The sensor adopts imported sensor with high sensitivity. Signal acquisition circuit shielding protection, which has strong anti-interference and high baseline stability.
The differential scanning calorimeter is touch screen type and can perform glass transition temperature test, phase transition test, melt and enthalpy test, product stability, curing, oxidation induction period test, specific heat test. It has a wide range of applications.
Technical parameter:
1. Temperature range: room temperature~600℃ (air cooling)
2. Temperature resolution: 0.01℃
3. Temperature fluctuation: ±0.1℃
4. Temperature repeatability: ±0.1℃
5. Heating rate: 0.1~100℃/min
6. Constant temperature time: program setting
7. Temperature control method: PID temperature control, heating, constant temperature (automatic program control)
8.DSC range: 0~±600mW
9. DSC resolution: 0.01uW
10.DSC sensitivity: 0.01mW
11. Working power supply: AC220V/50Hz or customized
12. Atmosphere control gas: nitrogen, oxygen (automatic switching of the instrument)
13. Gas flow: 0-300mL/min
14. Gas pressure: 0.2MPa
15. Display mode: 24bit color, 7-inch LCD touch screen display
16. Data interface: standard USB interface
17. Parameter standard: equipped with standard material (indium, tin), the user can calibrate the temperature by himself
18. The instrument has multiple sets of thermocouples, one set to test the sample temperature, and one set to test the internal ambient temperature of the instrument
19. The instrument has a multi-point calibration function, which can meet the precise test of high, medium and low samples
20. The software can set the frequency of data collection, and can export EXECL data packages and PDF reports
21. Curve scanning: heating scanning, cooling scanning, constant temperature scanning
Technical feature:
1. Industrial-grade 7-inch touch screen with rich display information.
2. The new ceramic furnace body structure has better baseline and higher precision. The heating adopts indirect conduction, with high uniformity and stability. Reduces pulsed radiation, superior to traditional heating modes.
3. USB communication interface, strong versatility, reliable and uninterrupted communication, and supports self-recovery connection function.
4. Automatically switch the two-way atmosphere flow, the switching speed is fast, and the stabilization time is short. At the same time, a protective gas input is added.
5. The software is simple and easy to operate.
Oxidation period test of PE, PPR and other pipes
Oxidation induction time (OIT) was measured by DSC (differential scanning calorimetry). The sample is usually heated to a specified temperature under a nitrogen atmosphere and held at a constant temperature, and then switched to an oxygen atmosphere. After a period of time, the material begins to oxidize and release heat. The released heat is detected by the sensor and analyzed by the software to obtain the oxidation induction time (OIT). The length of the oxidation induction time is a parameter of the resistance to oxidative decomposition of the reaction material, and it is very meaningful. Usually, buried plastic pipes must be Check this parameter.

Vitrification test of resin and other materials:
For amorphous polymers, when the polymer changes from a high elastic state to a glass state by cooling, or from a glass state to a high elastic state by heating up, it is called glass transition, and the temperature at which the glass transition occurs is called glass transition. temperature. For crystalline polymers, glass transition refers to the transition from a highly elastic state to a glassy state (or a glassy state to a highly elastic state) that occurs in the amorphous part of the polymer. Therefore, glass transition is a ubiquitous phenomenon in polymers. However, the glass transition phenomenon is not limited to macromolecules, and some small molecular compounds also have glass transitions.

Material melting point, enthalpy test (thermal stability test)
The melting point is the temperature at which a solid transforms its physical state from a solid state or melts into a liquid state. A mixture of multiple components produces a multimodal peak.

Curing test of glue and other materials
Refers to the process of changing substances from low molecules to high polymers, and the strength of the cured sample will be higher

Keyword:
Related Products
Message
Dear customer, if you have any opinions or suggestions regarding our products or services, please let us know in a timely manner and we will provide you with satisfaction as soon as possible